SafeStream Multi-WAN Router
09
Connection
3.4 Power On
Plug the female connector of the provided power cord into the power socket of the device, and the
male connector into a power outlet as the following figure shows.
Figure 3-2
Connecting to Power Supply
1
2
Note:
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
3.5 Initialization
After the device is powered on, it begins the Power-On Self-Test. A series of tests run automatically
to ensure the device functions properly. During this time, its LED indicators will respond as follows:
■
The PWR LED will light on all the time.
■
The WAN and Speed LED will light on for about one second then turn off during the initilization.
■
The SYS LED will flash quickly during the initialization. After the initilization finished, the SYS LED will
flash every second continuously.
3.6 Accessing the Router
After the initializaiton finished, you can access and manage the router using the GUI (Graphical User
Interface)
.
To access the router using the GUI, open a web browser and type the default management
address http://192.168.0.1 in the address field, then press the Enter key. Create a username and a
password for subsequent login attempts. Use the username and password set previously to log in to
the router.
For the detailed configurations, please refer to the Configuration Guide. The guide can be found on
the download center of our official website: http://www.tp-link.com/en/download-center.html.
