SafeStream Multi-WAN Router
08
Connection
Chapter 3 Connection
3.1 WAN Port
Please connect the WAN port of the router to the interface provided by ISP via Ethernet cable.
3.2 LAN Port
Connect a LAN port of the router to the computer by RJ45 cable as the following figure shows.
Figure 3-1
Connecting the LAN Port
LAN Port
RJ45 Cable
RJ45 Port
Note:
If the router is connecting to Server/Switch or other Ethernet devices, please make sure the
RJ45 cable is less than 100m.
3.3 Verify Installation
After completing the installation, please verify the following items:
■
There are 5~10cm of clearance around the sides of the device for ventilation and the air flow is
adequate.
■
The voltage of the power supply meets the requirement of the input voltage of the device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network devices.
