6
Chapter 2
Set Up Internet Connection
2. 1.
Quick Setup
Power on
Plug the extender into an electrical outlet
next to your host router
, and then wait until
the Power LED is solid on.
For safety, we suggest that you plug the extender in upright direction as shown below.
Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is an easier way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these: | | .
2. 1. 1.
Method One: Via the WPS Button
1. Press the WPS button on your host router, and then press the
button on the
extender within 2 minutes.
Tips:
•
Some ISP gateways disable the WPS function by default. If the WPS connection fails, please
refer to
.
WPS
