PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
7
Chapter 3 Quick Installation Guide
This chapter will guide you to configure your PC to communicate with the AP and to configure and
manage the PW-AN401/PW-AN401D 150M Wireless N Access Point easily with a Web-based
utility.
3.1 Configure the PC
This chapter will guide you to configure your PC to communicate with the AP. The wireless
adapter-equipped computers in your network must be in the same IP Address range without
overlap with each other. Manually configure the
IP address
as 192.168.0.* (* is any integer
between 1 to 253), and the
Subnet mask
as 255.255.255.0 for your PC by following the
instructions below.
Connect the local PCs to the LAN ports on the AP and configure the IP address manually for your
PCs.
1. Click
Start
(in the lower left corner of the screen), right-click
My Network Connections
and
choose
Properties
.
Figure 3-1
2. On
the
My
Network Connections
window shown as Figure 3-2 below, right-click
LAN (Local
Area Connection)
and choose
Properties
.
