TP-Link JetStream T2600G-28TS Скачать руководство пользователя страница 256

Страница: 256 / 1136

Configuring VLAN-VPN

Basic VLAN-VPN Configuration

User Guide

227

TPID

Specify the value of TPID. TPID is a field of VLAN tag and is modified to make the

double tagged packets identifiable to devices from different vendors.

Missdrop

Enable the Missdrop feature. This option only can take effect on tagged packets.

With Missdrop enabled, the tagged packets that don’t match the VLAN Mapping

entries will be dropped.

Note:

For T2600G-28TS/T2600G-28MPS/T2600G-28SQ/T2600G-52TS, Missdrop can

only be enabled on UNI ports.
For T2600G-18TS, Missdrop can only be enabled on NNI ports.

Use Inner

Priority

Enable this function and the switch will determine the forwarding sequence of the

packets according to the 802.1p priority of the inner VLAN tag.

It is available only when the port role is UNI.

Note:

•

The PVID of the UNI port should be specified as the VLAN ID of the ISP VLAN.

•

The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and

not its own. The configurations of the port can take effect only after it leaves the LAG.

2.2 Using the CLI

2.2.1 Configuring 802.1Q VLAN

Before configuring VLAN-VPN, create 802.1Q VLAN, add ports to corresponding VLANs

and configure Ingress Checking on ports according to your needs. For details, refer to

Configuring 802.1Q VLAN

2.2.1 Configuring Basic VLAN-VPN

Follow these steps to configure basic VLAN-VPN:

Step 1

configure

Enter global configuration mode.

Step 2

dot1q-tunnel

Enable the VLAN-VPN feature globally.

Step 3

interface {fastEthernet

port

| range fastEthernet

port-list

| gigabitEthernet

port

| range

gigabitEthernet

port-list

| ten-gigabitEthernet

port

| range ten-gigabitEthernet

port-list

port-channel

port-channel-id

| range port-channel

port-channel-list

}

Enter interface configuration mode.

Содержание JetStream T2600G-28TS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JetStream T2600G-28TS

Отзывы:

Похожие инструкции для JetStream T2600G-28TS

Бренды по названию

Популярные бренды

TP-Link JetStream T2600G-28TS, Руководство пользователя

Результаты поиска

Содержание JetStream T2600G-28TS

Отзывы:

Похожие инструкции для JetStream T2600G-28TS

Бренды по названию

Популярные бренды