TP-Link EC220-F5 Скачать руководство пользователя страница 10

Страница: 10 / 174

Chapter 1

Get to Know About Your Router

Some Common LEDs Explanation

LED

Status

Indication

(Power)

The system has started up successfully.

Flashing

slowly

The system is starting up or the firmware is being upgraded. Do

not disconnect or power off your router.

Flashing

quickly

WPS connection is in process.

Off

Power is off.

(2.4GHz Wireless)

The 2.4GHz wireless band is enabled.

Off

The 2.4GHz wireless band is disabled.

(5GHz Wireless)

The 5GHz wireless band is enabled.

Off

The 5GHz wireless band is disabled.

(Internet)

Green On

Internet service is available.

Orange On The router’s WAN port is connected, but the internet service is

not available.

Off

The router’s WAN port is unplugged.

(Ethernet)

At least one powered-on device is connected to the router’s LAN

port.

Off

No powered-on device is connected to the router’s LAN port.

(USB)

The USB device is identified and ready to use.

Flashing

A new USB device is being identified.

Off

No USB device is plugged in to the USB port.

1 2 2 The Back Panel

Содержание EC220-F5















































































































































































Результаты поиска

Содержание EC220-F5

Отзывы:

Похожие инструкции для EC220-F5

Бренды по названию

Популярные бренды

TP-Link EC220-F5, Руководство пользователя

Результаты поиска

Содержание EC220-F5

Отзывы:

Похожие инструкции для EC220-F5

Бренды по названию

Популярные бренды