13
Chapter 4
Set Up Internet Connections
4 1 Use Quick Setup Wizard
To set up your router with several easy steps quickly:
1
Visit
, and log in with the password or your TP-Link ID.
2
Click
Quick Setup
, after configuring your time zone, confirm the parameters with
the information provided by your ISP in the
SIM
part and click
Next
.
Note:
1. Quick Setup is not available if your SIM card is locked. Unlock your SIM card according to the prompt.
2. It is recommended to enable
Smart Connect
to enjoy a seamless connection between dual-band networks. With
Smart Connect enabled, the router’s 2.4GHz and 5GHz share the same SSID (network name) and password.
3
Follow the on-screen instructions to complete the setup.
Note:
1. During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.
Once done, all your wireless devices must use the new SSID and password to connect to the router.
2. The router supports two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a
modem or your internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless
router to share the internet. Refer to
for details.
4 2 Create a Connection Profile
If your ISP settings are not detected by the router, you can create an internet connection
profile by following the steps below:
1
Visit
, and log in with the password or your TP-Link ID.
2
Go to
Advanced
>
Network
>
Internet
page.
Содержание Archer MR600
Страница 1: ...REV1 1 0 1910012622 User Guide AC1200 4G LTE Advanced Cat6 Gigabit Router...
Страница 14: ...Chapter 3 Log In to Your 4G LTE Router...
Страница 72: ...68 Chapter 11 Specify Your Network Settings 4 Select Use my Internet connection VPN...
Страница 112: ...108 4 7 9 1 4 7 9 2 BSMI Notice Pb Cd Hg CrVI PBB PBDE PCB 1 0 1 wt 0 01 wt 2 3...