Quick Installation Guide
AC1750 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
Connect to the Internet
4
Upstream: Solid
Online: Solid
Wireless: Solid
Downstream: Solid
Power: Solid
Wait about 15 minutes for the modem router to
synchronize with the Internet service provider's (ISP)
server and make sure the following LEDs are on.
7106505264 REV1.0.1
Archer CR700
LAN1
LAN2
LAN3
LAN4
Power ON/OFF
DC
Cable
USB1
USB2
WiFi ON/OFF
Reset
WPS
C
1
Connect the coaxial cable
to the modem router.
2
Power on your
modem router.
3
Internet
Power adapter
6
Test your Internet connection using a web browser and
type in a valid URL (for example, http://www.tp-link.com).
http://www.tp-link.com
Enjoy!
Note: If the Internet is not accessible, contact your ISP and
make sure that the Archer CR700 is activated.
5
Contact your ISP (Comcast, Time Warner Cable, COX,
Charter, Cablevision and so on) to activate the Archer
CR700. During activation, you will need your account
information, the serial number and MAC address which
can be found on the product label of the modem router.
Note: If your ISP is Comcast, you can activate as follows:
1. Open a web browser. You should be automatically
redirected to the Comcast Xfinity Activation page.
If not, go to
www.comcast.com/activate
.
2. Follow the on-screen instructions to activate the Archer
CR700. Make sure you have your account information
ready.
If you are unable to activate your modem router, call
Comcast Xfinity customer service at
1-800-XFINITY
(1-800-934-6489).
Note: Please leave the Archer CR700 powered on at
all times during this process.
Connect to
the computer
.
"$8JSFMFTT%VBM#BOE%0$4*4
$BCMF.PEFN3PVUFS
FCC ID:TE7CR700V1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
.PEFM
"SDIFS$3
1PXFS
7"
%FGBVMU"DDFTT
IUUQUQMJOLNPEFNOFU
6TFSOBNFBENJO
1BTTXPSEBENJO
MAC:XXXXXXXXXXXX
Wireless Password/PIN:XXXXXXXXX
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Model:Archer CR700
ver:1.0
S/N:XXXXXXXXXXXXX
E470610
For additional and more advanced configuration, log in to the
web-based management at tplinkmodem.net or 192.168.1.1,
and enter
admin
(all lowercase) for both username and
password.
Wired: Using an Ethernet cable.
Wireless: Using the default
SSID (Network Name) and
Wireless Password printed on
the product label at the bottom
of the Archer CR700.
