If your internet connection is through an Ethernet cable directly from
the wall instead of through a modem, connect the Ethernet cable to
the router’s Internet port, then follow Step 4 and 5 to complete the
hardware connection.
Verify that the following LEDs
are on and solid to confirm the
hardware is connected correctly.
5
2.4G
On
5G
On
On
Internet
Power
On
Note: If the 2.4G LED and 5G LED are off,
press and hold the
WPS/Wi-Fi On/Off
button
on the rear panel for 2 seconds and both the
LEDs should turn solid on in a few seconds.
Connect the Hardware
AC1350 Wireless Dual Band Router
Quick Installation Guide
C60
Connect the power
adapter to the
router and turn on
the router.
4
Modem
Power adapter
Power adapter
Router
Internet
Connect the modem to the
router’s Internet port with an
Ethernet cable.
Turn off the modem, and
remove the backup battery if it
has one.
1
Turn on the modem, and
then wait about
2 minutes
for it to restart.
3
2
