Quick Installation Guide
AC5200 Wireless Tri-Band MU-MIMO Gigabit Router
Connecting the Hardware
Turn on the modem, and then wait
about
2 minutes
for it to restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable directly to the router’s Internet port, then follow steps
5 and 6 to complete the hardware connection.
Router
Modem
Power adapter
Turn off the modem, and
remove the backup battery
if it has one.
2
Place the router horizontally and extend the
antennas to the maximum angle.
1
Note: For best performance, horizontal installation is recommended.
Antenna direction and position can affect performance in vertical installation situations.
4
3
Turn on the router.
5
Verify that the following LEDs are on and stable before continuing with
the configuration.
6
Internet
On
Internet
5GHz-1
On
5GHz-2
On
Power
On
2.4GHz
On
5200
Tips:
1. If all the LEDs are off, press the LED On/Off button for about 1 second, then check the LEDs again.
2. If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi On/Off button for about 2 seconds, then
check the LEDs again in a few seconds.
