TP-Link Archer C50(EU)3.0, Руководство пользователя

Страница: 30 / 83

27
Chapter 4
4. 4. 3. Wireless Security
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Security .
3. Configure the security settings of your wireless network and click Save .
• Disable Wireless Security - The wireless security function can be enabled or disabled.
If disabled, wireless clients can connect to the router without a password. It’s strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-
shared passphrase.
• Authentication Type - Select Auto , WPA-PSK or WPA2-PSK .
• Encryption - Select Auto , TKIP or AES .
• Wireless Password - Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period - Specify the group key update interval in seconds.
The value can be 0 or at least 30. Enter 0 to disable the update.