Quick Installation Guide
AC1900 High Power Wireless Dual Band Gigabit Router
Connect the Hardware
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 5 and 6 to
complete the hardware connection.
7106506180 REV1.0.0
Verify that the following LEDs are on
and solid before continuing with the
configuration.
6
Power
On
On
Internet
2.4G
On
5G
On
Note: If the 2.4G LED and 5G LED are off, please press
the Wi-Fi On/Off button on the side panel for 2 seconds
and check the LEDs again a few seconds later.
Turn on the modem, and then
wait about
2 minutes
for it to
restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Modem
Router
Power adapter
Power adapter
Turn off the modem,
and remove the backup
battery if it has one.
2
3
4
Internet
1
Install the antennas.
Turn on the router.
5
