TP-Link Archer A7, Руководство пользователя

Страница: 89 / 124

85
Chapter 15 Customize Your Network Settings
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto , if you are not experiencing the intermittent wireless
connection issue.
• Transmit Power - Select either High , Middle or Low to specify the data transmit power.
The default and recommended setting is High .
15 7 Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit
http://tplinkwifi.net , and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Wireless > WPS .
15 7 1 Set the Router’s PIN
Router’s PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
• If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS , tick or untick the
Enable WPS checkbox.
• PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
15 7 2 Use the WPS Wizard for Wi-Fi Connections
1. Select a setup method:
• Push Button(Recommended) : Click Connect on the screen. Within two minutes,
press the WPS button on the client device.
• PIN : Enter the client’s PIN, and click Connect .