TP-Link Archer A7, Руководство пользователя

Страница: 62 / 124

58
Chapter 12 Network Security
5 If you want to ignore the ping packets from the WAN port, select Ignore Ping Packet
From WAN Port ; if you want to ignore the ping packets form the LAN port, select
Ignore Ping Packet From LAN Port .
6 Click Save .
12 2 Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net , and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced > Security > Access Control .
3 Enable Access Control .
4 Select the access mode to either block (recommended) or allow the device(s) in the
list.
• To block specific device(s)
1 ) Select Blacklist and click Save .
2 ) Select the device(s) to be blocked in the Online Devices table by ticking the box.