Toyota Venza 2021, Руководство пользователя

Страница: 301 / 548

300
4-5. Using the driving support systems
or snow, the TRAC system may
reduce power from the hybrid sys-
tem to the wheels.
Pressing to turn the system off
may make it easier for you to rock
the vehicle in order to free it.
To turn the TRAC system off,
quickly press and release
.
“Traction Control Turned OFF” will
be shown on the multi-information
display.
Press again to turn the system
back on.
■ Turning off both TRAC and VSC
systems
To turn the TRAC and VSC systems
off, press and hold
for more than
3 seconds while the vehicle is
stopped.
The VSC OFF indicator light will
come on and the “Traction Control
Turned OFF” will be shown on the
multi-information display.
*
Press again to turn the systems
back on.
*
: PCS will also be disabled (only
Pre-Collision warning is avail-
able). The PCS warning light will
come on and a message will be
displayed on the multi-information
display. (

P.242)
■ When the message is dis-
played on the multi-information
display showing that TRAC has
been disabled even if
has
not been pressed
TRAC is temporary deactivated. If
the information continues to show,
contact your Toyota dealer.
■ Operating conditions of hill-
start assist control
When the following four conditions
are met, the hill-start assist control
will operate:
● The shift lever is in a position
other than P or N (when starting
off forward/backward on an
upward incline).
● The vehicle is stopped.
● The accelerator pedal is not
depressed.
● The parking brake is not engaged.
■ Automatic system cancelation
of hill-start assist control
The hill-start assist control will turn
off in any of the following situations:
● The shift lever is shifted to P or N.
● The accelerator pedal is
depressed.
● The parking brake is engaged.
● 2 seconds at maximum elapsed
after the brake pedal is released.
■ Sounds and vibrations caused
by the ABS, brake assist, VSC,
TRAC and hill-start assist con-
trol systems
Any of the following conditions may
occur when the above systems are
operating. None of these indicates
that a malfunction has occurred.
• Vibrations may be felt through the
vehicle body and steering.
• A motor sound may be heard also
after the vehicle comes to a stop.
■ ECB operating sound
ECB operating sound may be heard