Toyota Tundra guide Скачать руководство пользователя страница 221 | Manualshive

Страница: 221 / 672

Toyota Tundra guide Скачать руководство пользователя страница 221

221

4

Dr

After refueling, turn the fuel tank
cap until you hear a click. Once
the cap is released, it will turn
slightly in the opposite direction.

■

Fuel types

(

■

E85 Fueling Stations (Flex-fuel vehicles)

E85 fueling stations and fuel pumps can be identified by the indication “E85
85% Ethanol”. For more information about fueling stations, please refer to the
U.S. Department of Energy Web site.
http://www.afdc.energy.gov/afdc/locator/stations/

■

Refueling (Flex-fuel vehicles)

Observe the following precautions when switching fuels, in order to maintain
starting and driving performance.

●

Do not change fuels when the fuel level is 1/4 or less.

●

Always add at least 2.6 gal. (10 L) of fuel.

●

After filling up with fuel, warm up the engine or drive the vehicle for at least 5
minutes or 7 miles (11 km).

●

Do not accelerate rapidly immediately after refueling.

■

Fuel tank opening for unleaded gasoline

To help prevent incorrect fueling, your vehicle has a fuel tank opening that
only accommodates the special nozzle on unleaded fuel pumps.

■

Closing the fuel tank cap

Tighten the fuel tank cap until 1 click is heard. Otherwise a malfunction indica-
tor lamp may come on.

Closing the fuel tank cap

«
...
219
220
221
222
223
...
»

Содержание Tundra guide

































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов