Toyota RAV4 2019 Скачать руководство пользователя

Страница: 92 / 244

3-3. Route guidance

Check that the list of the dis-
tance and time is displayed.



By selecting one of the num-
ber buttons, the desired route
information is displayed.

“Arrival Time”: Select to display the
estimated arrival time.
“Time to Dest.”: Select to display
the estimated travel time.

●

When the vehicle is on the guid-

ance route, the distance mea-

sured along the route is displayed.

Travel time and arrival time are

calculated based on the average

speed of the specified speed limits

and current traffic information.

●

When the vehicle gets off the

guidance route, the arrow facing

the destination is displayed

instead of the estimated

travel/arrival time.

●

The route information bar fills from

left to right as the vehicle pro-

gresses along the route.

During freeway driving, the free-
way information screen can be
displayed.

Distance from the current
position to the freeway
exit/rest area

Name of the freeway exit/rest
area

POIs that are close to a free-
way exit

Select to display the selected
map of the exit vicinity.

Select to display the nearest
freeway exits/rest areas from
the current position.

: Select to scroll to farther free-

way exits/rest areas.

: Select to scroll to closer free-

way exits/rest areas.

When the vehicle approaches
an exit or junction, the freeway
guidance screen will be dis-
played.

During freeway driving

When approaching free-
way exit or junction

Содержание RAV4 2019




















































































































































































































































Результаты поиска

Содержание RAV4 2019

Отзывы:

Похожие инструкции для RAV4 2019

Бренды по названию

Популярные бренды

Toyota RAV4 2019, Руководство пользователя

Результаты поиска

Содержание RAV4 2019

Отзывы:

Похожие инструкции для RAV4 2019

Бренды по названию

Популярные бренды