Toyota RAV4 2019, Руководство пользователя

Страница: 76 / 244

76
3-1. Basic operation
The traveled route can be stored
and retraced on the map screen.
This feature is available when
the map scale is 30 miles (50
km) or less.
1
Select on the map
screen. (

P.68)
2
Select “Route Trace”.
 The route trace starts.
3
Check that the traveled line is
displayed.
1
Select on the map
screen. (

P.68)
2
Select “Route Trace” again.
3
A confirmation screen will be
displayed.
“Yes”: Select to keep the recorded
route trace.
“No”: Select to erase the recorded
route trace.
● The traveled route can be stored
up to approximately 621 miles
(1000 km).
When the cursor is placed over
an icon on the map screen, the
name is displayed at the top of
the screen. If “Info” is shown to
the right of the name, detailed
information can be displayed.
1
Place the cursor over an
icon.
2
Select “Info”.
3
Check that the information
screen is displayed.
“Save”: Select to register as
a memory point. To change
the icon, name, etc.:

P.98
“Go”/“Enter”: Select to set as
a destination.
: Select to call the regis-
tered number.
“Delete”: Select to delete
destination or memory point.
“Edit”: Select to display the
edit memory point screen.
● Even when traffic information is
not currently being received, traffic
information and “Info” will be dis-
Route trace
Start recording the route
trace
Stop recording the route
trace
Displaying information
about the icon where the
cursor is set