Toyota RAV4 2019 страница 138 Скачать руководство пользователя

Страница: 138 / 244

138

4-3. Media operation

Select to change the album.

Displays cover art

Press to change the track.
Press and hold to fast for-
ward/rewind.

Turn to change the track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.

The track or album currently
being listened to can be
repeated.

Select

●

Each time

is selected, the

mode changes as follows:



When random playback is off

• track repeat



album repeat



off



When random playback is on

• track repeat



off

Tracks or albums can be auto-
matically and randomly

selected.

Select

●

Each time

is selected, the

mode changes as follows:

• random (1 album random)



album random (all album random)



off

●

Depending on the Bluetooth

device that is connected to the
system, the music may start play-
ing when selecting

while it is

paused. Conversely, the music
may pause when selecting

while it is playing.

●

In the following conditions, the

system may not function:

• The Bluetooth

device is turned

off.

• The Bluetooth

device is not con-

nected.

• The Bluetooth

device has a low

battery.

●

When using the Bluetooth

audio

and Wi-Fi

Hotspot functions at

the same time, the following prob-

lems may occur:

• It may take longer than normal to

connect to the Bluetooth

device.

• The sound may cut out.

●

It may take time to connect the
phone when Bluetooth

audio is

being played.

●

For operating the portable player,

see the instruction manual that

comes with it.

●

If the Bluetooth

device is discon-

nected due to poor reception from
the Bluetooth

network when the

engine switch <power switch> is

in ACC or ON, the system auto-

matically reconnects the portable

player.

●

If the Bluetooth

device is discon-

nected on purpose, such as it was

Control panel

Repeating

Random order

Содержание RAV4 2019




















































































































































































































































Результаты поиска

Содержание RAV4 2019

Отзывы:

Похожие инструкции для RAV4 2019

Бренды по названию

Популярные бренды

Toyota RAV4 2019, Руководство пользователя

Результаты поиска

Содержание RAV4 2019

Отзывы:

Похожие инструкции для RAV4 2019

Бренды по названию

Популярные бренды