1999-2000 STEERING
Power Rack & Pinion - Trucks
DESCRIPTION & OPERATION
System consists of a rack and pinion assembly, hydraulic power steering pump, hoses and control valves. On
some models an air control valve is used to increase idle speed when power steering pump is under load.
LUBRICATION
FLUID TYPE
Use Dexron-II or Dexron-III ATF fluid.
FLUID LEVEL CHECK
When fluid is at normal operating temperature, fluid level should be between HOT marks on fluid reservoir.
When fluid is cold, fluid level should be between COLD marks on fluid reservoir. Add as necessary.
HYDRAULIC SYSTEM BLEEDING
1. With engine off, check fluid level in power steering pump reservoir. See
FLUID LEVEL CHECK
.
Raise and support vehicle. Turn wheels fully in both directions. Lower vehicle. Start engine and run at
idle.
2. Turn wheels fully to lock in one direction. Hold for a few seconds. Turn wheels fully to opposite lock.
Hold for a few seconds. Repeat process several times.
3. Check fluid. If there is no evidence of excess bubbles or foaming, bleeding is complete. If not, repeat
process until no bubbling is evident. Adjust fluid level as necessary.
ADJUSTMENTS
POWER STEERING PUMP BELT
Using belt tension gauge, measure belt tension. See
BELT TENSION SPECIFICATIONS
table.
BELT TENSION SPECIFICATIONS
Application
(1)
Lbs. (kg)
RAV4
New
95-145 (43-66)
Used
(2)
60-100 (27-45)
Sienna
New
150-185 (68-84)
Used
(2)
95-135 (43-61)
1999 Toyota RAV4
1999-2000 STEERING Power Rack & Pinion - Trucks
1999 Toyota RAV4
1999-2000 STEERING Power Rack & Pinion - Trucks
Microsoft
Sunday, November 22, 2009 10:35:46 AM
Page 1
© 2005 Mitchell Repair Information Company, LLC.
Microsoft
Sunday, November 22, 2009 10:35:50 AM
Page 1
© 2005 Mitchell Repair Information Company, LLC.
