Toyota RAV 4 2019, Руководство пользователя

Страница: 139 / 728

139
3-3. Adjusting the seats
3
Be
for
e
driv
in
g
*
: If equipped
■
Recording procedure
1
Check that the shift lever is in
P.
2
Turn the engine switch to
ON.
3
Adjust the driver’s seat to the
desired positions.
4
While pressing the “SET” but-
ton, press button “1” or “2”
until the buzzer sounds.
If the selected button has already
been preset, the previously
recorded position will be overwrit-
ten.
■
Recall procedure
1
Check that the shift lever is in
P.
2
Turn the engine switch to
ON.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■ To stop the position recall oper-
ation part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1” or “2”.
● Operate any of the seat adjust-
ment switches.
■ Seat positions that can be
memorized (

P.135)
The adjusted positions other than
the position adjusted by lumbar sup-
port switch can be recorded.
Driving position mem-
ory
*
This feature automatically
adjusts the driver’s seat to
suit your preferences.
Your preferred driving posi-
tion (the position of the
driver’s seat) can be
recorded and recalled by
pressing a button.
Two different driving posi-
tions can be recorded into
memory.
Each electronic key can be
registered to recall your pre-
ferred driving position.
Recording/recalling a
driving position