Toyota Prius 2018, Руководство пользователя

Страница: 98 / 820

98
PRIUS_OM_OM47B89U_(U)
2. Instrument cluster
■
The meters and display illuminate when
The power switch is in ON mode.
■
Adjusting the instrument cluster brightness (
→
P. 94)
●
The brightness levels that can be selected differ depending on whether the
tail lights are on and surrounding brightness levels, as shown in the table
below.
*
: 22 levels of the brightness are displayed on the setting screen. However,
the brightness setting will be the brightest when other than 1st level (the
darkest) is selected. If other than 1st or 22nd level is selected, when the
tail lights are turned on in a dark place, the instrument cluster brightness
setting will be the selected level.
●
If the taillights are illuminated in a dark environment, the instrument cluster
light dims. However, when the brightness of the instrument cluster is set to
minimum or maximum (1st or 22nd level of the instrument cluster bright-
ness), even if the taillights are illuminated, the instrument cluster light will
not dim.
■
When disconnecting and reconnecting 12-volt battery terminals
The settings of the clock will be reset.
■
Calendar settings
●
Until the calendar settings are set, the check screen is displayed every time
the power switch is turned to ON mode.
●
After the calendar information is set, it can be changed in the “Meter Cus-
tomize” settings. (
→
P. 142)
The tail lights are off The tail lights are on
In a bright place
2 levels
*
2 levels
*
In a dark place 22 levels
If calendar recording is interrupted due to
replacement of the 12-volt battery or 12-
volt battery discharge, etc., when the
power switch is turned to ON mode after
maintenance, the calendar settings check
screen is automatically displayed on the
multi-information display.
●
If date information is not set, the fuel
consumption record cannot be stored
correctly. When the calendar settings
check screen is displayed, make sure to
always set the settings. (
→
P. 139)