manualshive.com logo in svg

Toyota Lexusc, Руководство пользователя

Поделиться
Скачать
Toyota Lexusc Скачать руководство пользователя страница 177

OCCUPANT RESTRAINT SYSTEMS

158

SEATS

While the vehicle is being driven, all vehicle occupants should
have the seatback upright, sit well back in the seat and properly
wear the seat belts provided.

CAUTION

Do not drive the vehicle unless the occupants are
properly seated.  Do not allow any passengers to sit
in the luggage compartment or cargo area.  Persons
not properly seated and/or not properly restrained by
seat belts can be severely injured in the event of
emergency braking or a collision.

During driving, do not allow any passengers to stand
up or move around between seats.  Otherwise, severe
injuries can occur in the event of emergency braking
or a collision.

FRONT SEATS

Front seat precautions

Driver seat

CAUTION

The SRS driver airbag deploys with considerable force,
and can cause death or serious injury especially if the
driver is very close to the airbag.  The National Highway
Traffic Safety Administration (“NHTSA”) advises:

Since the risk zone for driver airbag is the first 50 — 75
mm (2 — 3 in.) of inflation, placing yourself 250 mm (10
in.) from your driver airbag provides you with a clear
margin of safety.  This distance is measured from the
center of the steering wheel to your breastbone.  If you
sit less than 250 mm (10 in.) away now, you can change
your driving position in several ways:

Move your seat to the rear as far as you can while still
reaching the pedals comfortably.

Содержание Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды