manualshive.com logo in svg

Toyota Lexus IS300, Руководство пользователя

Поделиться
Скачать
Toyota Lexus IS300 Скачать руководство пользователя страница 237

STARTING AND DRIVING

224

THREE–WAY CATALYTIC

CONVERTER

SV31040

Three–way catalytic converters are emission control
devices installed in the exhaust system.

It looks somewhat like a muffler, but its purpose is to reduce
pollutants in the exhaust gas.

CAUTION

Keep people and combustible materials away from
the exhaust pipe while the engine is running.  The
exhaust gas is very hot.

Do not drive, idle or park your vehicle over anything
that might burn easily such as grass, leaves, paper or
rags.

NOTICE

A large amount of unburned gases flowing into the
three–way catalytic converter may cause it to overheat
and create a fire hazard.  To prevent this and other
damage, observe the following precautions:

Use only unleaded gasoline.

Do not drive with an extremely low fuel level; running
out of fuel could cause the engine to misfire, creating
an excessive load on the three–way catalytic
converter.

Do not allow the engine to run at idle speed for more
than 20 minutes.

Avoid racing the engine.

Do not push–start or pull–start your vehicle.

Do not turn off the ignition while the vehicle is
moving.

Keep your engine in good running order.
Malfunctions in the engine electrical system,
electronic 

ignition system or fuel system could cause

an extremely high three–way catalytic converter
temperature.

If the engine becomes difficult to start or stalls
frequently, take your vehicle in for a check–up as
soon as possible.  Remember, your Lexus dealer
knows your vehicle and its three–way catalytic
converter system best.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Содержание Lexus IS300






































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды