Toyota JAT710, Руководство по установке

Страница: 97 / 136

4.1 JAT710 Technical Information
97
4.1.3 Yarn Number Count of Warp
4.1.4 Picking Density
4.1.5 Warp Tension Setting Range
NOTES:
•
In case of twin beams, the total tension setting range of both RH and LH warp beams should be
30 to 500 kg. The setting range of each beam should be 15 to 250 kg.
•
If the reed space is 360 or 390 cm, however, the total tension of both RH and LH warp beams
should be set within the range from 30 to 600 kg, and the tension of each beam within the range
from 15 to 300 kg.
4.1.6 Possible Weaving Range (Yarn density vs. Yarn number count)
The graph below shows the possible weaving range for spun yarn.
150 170 190 210 230 250 280 336
Spun yarn Ne5.5-100’s Ne9-60’s Ne14-60’s Ne14-50’s
Filament yarn 30d-450d — — 40d-270d — —
Glass fiber dtex 55-1340 — — — — — — —
Wool yarn — — Ne19/2-37’s — — — — —
Standard density Low density
Mechanical 30 to 240 picks/inch (11.8 to 94.5 picks/cm) 9 to 100 picks/inch (3.5 to 34.9 picks/cm)
Electrical 30 to 240 picks/inch (11.8 to 94.5 picks/cm) —
Yarn type Warp tension setting range (kgf)
Spun yarn
Standard density 300-500
Low density 10-150
Filament yarn 30-300
R/S(cm)
Yarn type
Reed space
Picking density
Take-up motion
W
ar
p De
ns
ity
+ W
ef
t De
n
sity
(y
ar
ns
/in
ch
)
Warp satin
Weft satin down-proof fabric
Weft satin
Down-proof fabric
Down-proof fabric
Down-proof fabric
Double cloth
Guide for weaving range
Sheeting
Towel (Arbitrary 2-color shift
)
Denim
Bed sheets
Twill Multi-color fancy fabric
(Arbitrary 4-color shift)
Poplin
Fancy fabric by dobby
(Arbitrary 4-color shift, using
different types of yarns with
different number counts)
Oxford sheeting
Satin stripe
Down-proof fabric
Average Number Count of Warp and Weft (Ne)
(Two-ply yarn is counted as two single-ply yarns.)
Oxford
Gingham (Arbitrary 4-color shift)
Oxford