4.3 TMS Scanner (TOYOTA MONITORING SYSTEM SCANNER)
123
4.3.2
Features of TMS Scanner
Understand the features of the TMS scanner, and check if the TMS scanner system satisfies cus-
tomer requirements.
•
The TMS scanner PC is a computer system on assumption of continuous operation for full 24
hours.
•
To ensure stabilized operation, we will supply the hardware such as the computer, uninterrupted
power supply (UPS), and hard disk drive (HDD).
•
The TMS scanner PC is wholly operated from the TMS.
•
The TMS cannot be installed on the TMS scanner PC because it is a dedicated computer.
Install the TMS on a separate computer.
•
Up to 800 looms can be connected to one TMS scanner PC. If the number of looms exceeds
800, two TMS scanner PCs (mater and sub) are necessary. The maximum total number of
JAT710 looms connected to the TMS and other looms connected to the TMS scanner PC(s) is
1,000.
•
The table below shows the restrictions on TMS functions of the looms (JAT610, etc.) for data col-
lection by the TMS scanner in comparison with those for JAT710.
(1) Restriction of TMS Functions by Loom Type
c
: Not restricted
U
: Restricted
¯
: Unusable
Data by shift
JAT710
JAT610, etc.
§
Shift report
c
U
§
Style report
c
U
§
Production output graph
c
c
§
Operation rate graph
c
c
§
Stop cause graph
c
U
§
Looming list and forecast
c
c
§
Stop history
c
¯
Machine data
JAT710
JAT610, etc.
§
Operation status display
c
c
§
Data collection (network)
c
c
§
Data reading (memory card)
c
¯
§
Link to loom screen
c
¯
§
Loom time setting
c
¯
§
Cloth/beam list setting
¯
c
§
Other list setting
¯
c
§
Cloth/beam maintenance
¯
c
