4. APPENDIX
118
4.2.8
Connection with Customer’s Network
(1) Introduction
For connection with the customer’s network, install a router to separate the loom TMS network from the
customer's network.
If directly connected, the data on the customer's network side may flow into the loom TMS network side
to overload loom task processing, possibly causing temporary failure in loom network communication.
(Ethernet CH1 error)
(2) Router installation example
Example of connection with
1) (Loom TMS network (172. 17. 1. ***)
2) (Customer’s company network (123. 456. 78. ***)
CISCO
SYSTEMS
Loom TMS network
(172.17.1.***)
Customer’s intracompany network
(123.456.78.***)
•
IP address: 172.17.1.***
•
Subnet mask: 255.255.255.0
•
Default gateway: 172.17.1.254
•
IP address: 123.456.78.***
•
Subnet mask: 255.255.255.0
•
Default gateway: 123.456.78.254
172.17.1.254
123.456.78.123
Router
