■
To reconnect Bluetooth
When Bluetooth connection is disconnected due to low radio
transmission circumstance, Bluetooth will perform an
automatic connection.
Note: The automatic connection will be performed only for
certain duration of time. If the connection wouldn’t be
established during the time, try it manually.
Note:
Some portable devices model may not support
this function.
■
When Bluetooth connection is disconnected on purpose
The automatic reconnection will not work when Bluetooth
has been disconnected on purpose, such as when
disconnected from the portable device side. In this case,
reconnect in either of the following ways.
・
Connect it manually
・
Reselect the portable device again.
■
To change a name of a portable device
The name of portable device that appears on the display
can be changed as desired.
・
Even if the name of a portable device is changed at
the system, the registered name in portable device will
not be changed automatically.
1. Press several times until "BT AUDIO" will
appear. Then press the button under the indicated
“SETUP” on the display.
2. Select portable device to connect after selecting
"change Name" by turning TUNE-SCROLL knob.
3.
Then select "NAME" and "RECORD NAME" on the
display after hearing blip read aloud a desired name
to be registered.
4.
To complete the change, press “CONFIRM” on the
display.
■
To change the Bluetooth setting of the system
・
pass key
It is a password, which is used when you register a
portable device into the system. It can be changed to the
desired 4 to 8 digit numbers.
