Toyota COROLLA iM 2017 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 384

Toyota COROLLA iM 2017 Скачать руководство пользователя страница 112

112

4-1. Before driving

COROLLA iM_U (OM12K64U)

■

When starting off on an uphill

The hill-start assist control will activate. (

■

Driving in the rain

●

Drive carefully when it is raining, because visibility will be reduced, the win-
dows may become fogged-up, and the road will be slippery.

●

Drive carefully when it starts to rain, because the road surface will be espe-
cially slippery.

●

Refrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road sur-
face, preventing the steering and brakes from operating properly.

■

Engine speed while driving (vehicles with a continuously variable trans-
mission)

In the following conditions, the engine speed may become high while driving.
This is due to automatic up-shifting control or down-shifting implementation to
meet driving conditions. It does not indicate sudden acceleration.

●

The vehicle is judged to be driving uphill or downhill

●

When the accelerator pedal is released

●

When the brake pedal is depressed while sport mode is selected

●

When the brake pedal is depressed suddenly and vehicle speed is reduced
sharply

■

Breaking in your new Toyota

To extend the life of the vehicle, observing the following precautions is recom-
mended:

●

For the first 186 miles (300 km):
Avoid sudden stops.

●

For the first 621 miles (1000 km):

• Do not drive at extremely high speeds.
• Avoid sudden acceleration.
• Do not drive continuously in low gears.
• Do not drive at a constant speed for extended periods.

■

Operating your vehicle in a foreign country

Comply with the relevant vehicle registration laws and confirm the availability
of the correct fuel. (

→

WARNING

Observe the following precautions.
Failure to do so may result in death or serious injury.

■

When starting the vehicle (vehicles with a continuously variable trans-
mission)

Always keep your foot on the brake pedal while stopped with the engine
running. This prevents the vehicle from creeping.

«
...
110
111
112
113
114
...
»

Содержание COROLLA iM 2017

































































































































































































































































































































































































Отзывы:

Нет отзывов