Toyota Corolla Hatchback 2023, Руководство пользователя

Страница: 141 / 436

141
4-2. Driving procedures
4
Dr
iv
ing
However, even when in the M
position, the gear steps will be
automatically changed if the
engine speed is too high, or too
low.
■ Gear step functions
● You can choose from 10 levels of
engine braking force.
● A lower gear step will provide
greater engine braking force than
a higher gear step, and the engine
speed will also increase.
■ When the vehicle comes to a
stop with the shift lever in the M
position
● The transmission will automati-
cally downshift to M1 once the
vehicle is stopped.
● After a stop, the vehicle will start
off in M1.
● When the vehicle is stopped, the
transmission is set at M1.
■ Downshifting restriction warn-
ing buzzer
To help ensure safety and driving
performance, downshifting opera-
tion may sometimes be restricted. In
some circumstances, downshifting
may not be possible even when the
shift lever or paddle shift switch (if
equipped) is operated. (A buzzer
will sound twice.)
■ If the 10-speed sport sequential
shiftmatic mode indicator does
not come on even after shifting
the shift lever to M
This may indicate a malfunction in
the continuously variable transmis-
sion system. Have the vehicle
inspected by your Toyota dealer
immediately.
(In this situation, the transmission
will operate in the same manner as
when the shift lever is in D.)
1
Right turn
2
Lane change to the right
(move the lever partway and
release it)
The right hand signals will flash 3
times.
3
Lane change to the left
(move the lever partway and
release it)
The left hand signals will flash 3
times.
4
Left turn
■ Turn signals can be operated
when
The engine switch is in ON.
■ If the indicator flashes faster
than usual
Check that a light bulb in the front or
rear turn signal lights has not
Turn signal lever
Operating instructions