background image

64

1-4. Hybrid system

COROLLA CROSS HYBRID_Kouzui_GE

1-4.Hybrid system

System components

The illustration is an example for explanation and may differ from the actual item.

Gasoline engine

Electric motor (traction motor)

When stopped/during start off

The gasoline engine stops

*

 when 

the vehicle is stopped. During start 
off, the electric motor (traction 
motor) drives the vehicle. At slow 
speeds or when traveling down a 
gentle slope, the engine is stopped

*

 

and the electric motor (traction 
motor) is used.

When the shift lever is in N, the 
hybrid battery (traction battery) is 
not being charged.

*

: When the hybrid battery (traction bat-

tery) requires charging or the engine 
is warming up, etc., the gasoline 
engine will not automatically stop. 
(

P.65)

Hybrid system features

Your vehicle is a hybrid vehicle. It has characteristics different from 
conventional vehicles. Be sure you are closely familiar with the 
characteristics of your vehicle, and operate it with care.

The hybrid system combines the use of a gasoline engine and an 
electric motor (traction motor) according to driving conditions, 
improving fuel efficiency and reducing exhaust emissions.

System components

COROLLA CROSS HYBRID_OM_General_OM16537E

Содержание COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Отзывы: