Toyota Celica 2003 Скачать руководство пользователя страница 218

Страница: 218 / 284

’03MY CELICA U (L/O 0208)

183

2003 CELICA from Aug. ’02 Prod. (OM20809U)

Check the interior of your vehicle.

Wa-

ter and dirt can accumulate under the

floor mats and could cause corrosion. Oc-
casionally check under the mats to make

sure the area is dry. Be particularly care-

ful when transporting chemicals, cleans-
ers, fertilizers, salt, etc.; these should be

transported in proper containers. If a spill

or leak should occur, immediately clean
and dry the area.

Use mud shields on your wheels.

If you

drive on salted or gravel roads, mud
shields help protect your vehicle. Full

−

size

shields, which come as near to the ground

as possible, are the best. We recommend
that the fittings and the area where the

shields are installed be treated to resist

corrosion. Your Toyota dealer will be
happy to assist in supplying and installing

the shields if they are recommended for
your area.

Keep your vehicle in a well ventilated

garage or a roofed place. Do not park
your vehicle in a damp, poorly venti-

lated garage.

If you wash your vehicle in

the garage, or if you drive it in covered
with water or snow, your garage may be

so damp it will cause corrosion. Even if

your garage is heated, a wet vehicle can
corrode if the ventilation is poor.

Washing your Toyota
Keep your vehicle clean by regular

washing.

The following cases may cause weakness

to the paint or corrosion to the body and
parts. Wash your vehicle as soon as pos-

sible.

When driving in a coastal area

When driving on a road sprinkled with

antifreeze

When having coal tar, tree sap, bird

droppings and carcass of an insect

When driving in the areas where there

is a lot of smoke, soot, dust, iron dust

and chemical substance

When the vehicle becomes remarkably

dirty with dust and mud

Hand

−

washing your Toyota

Work in the shade and wait until the
vehicle body is not hot to the touch.

CAUTION

When cleaning under floor or chassis,
be careful not to injure your hands.

1. Rinse off loose dirt with a hose. Re-

move any mud or road salt from the

underside of the vehicle or in the

wheel wells.

2. Wash with a mild car

−

wash soap,

mixed according to the manufacturer’s

instructions. Use a soft cotton mitt and
keep it wet by dipping it frequently into

the wash water. Do not rub hard—let

the soap and water remove the dirt.

Plastic wheel ornaments: The plastic

wheel ornaments are damaged easily by
organic substances. If any organic sub-

stances splashes an ornament, be sure to

wash it off with water and check if the
ornament is damaged.

CAUTION

Do not attach the heavily damaged
plastic wheel ornament. It may fly off

the wheel and cause accidents while

the vehicle is moving.

Aluminum wheels: Use only a mild soap

or neutral detergent.
Plastic bumpers: Wash carefully. Do not

scrub with abrasive cleaners. The bumper

faces are soft.

Washing and waxing your

Toyota

Содержание Celica 2003





























































































































































































































































































Результаты поиска

Содержание Celica 2003

Отзывы:

Toyota Celica 2003, Руководство пользователя, Страница: 218 / 284

Результаты поиска

Содержание Celica 2003

Отзывы: