manualshive.com logo in svg

Toyota Celica 2003, Руководство пользователя, Страница: 155 / 284

Поделиться
Скачать
Toyota Celica 2003 Скачать руководство пользователя страница 155

Limitations

The performance of necessary repairs and adjustments is the exclusive
remedy under these warranties or any implied warranties. Toyota does
not authorize any person to create for it any other obligation or liability
in connection with this vehicle.

Any implied warranty of merchantability or fitness for a particular
purpose is limited to the duration of these written warranties.

Some states do not allow restrictions on how long an implied warranty
lasts, so this limitation may not apply to you.

Your Rights Under State Law

These warranties give you specific legal rights. You may also have other
rights that vary from state to state.

Your Warranties in Detail

8

General Warranty Provisions

Содержание Celica 2003





























































































































































































































































































Отзывы:

Нет отзывов