Toyota C-HR 2017, Руководство пользователя

Страница: 246 / 292

246
5. SETUP
C-HR_Navi_USA_OM10581U_17CY
■
POSITION/DIRECTION CALIBRA-
TION
1
Select “Position/Direction” .
2
Scroll the map to the desired point
(

P.200) and select “OK” .
3
Select an arrow to adjust the direction
of the current position mark and select
“OK” .
■
TIRE CHANGE CALIBRATION
1
Select “Tire Change” .
 The message appears and the quick dis-
tance calibration starts automatically.
1
Display the detailed navigation settings
screen.
(

P.243
)
2
Select “Low Fuel Warning Pop-up” .
3
Select “On” or “Off” .
■
SEARCHING GAS STATION IN LOW
FUEL WARNING
1
Select “Yes” when the low fuel warn-
ing appears.
2
Select the desired nearby gas station.
3
Select “Enter” to set as a destination.
“Info” : Select to display gas station infor-
mation. (

P.201)
When driving, the current position
mark will be automatically corrected by
GPS signals. If GPS reception is poor
due to location, the current position
mark can be adjusted manually.
The tire change calibration function will
be used when replacing the tires. This
function will adjust miscalculation
caused by the circumference differ-
ence between the old and new tires.
INFORMATION
●
If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
LOW FUEL WARNING
When the fuel level is low, a warning
message will pop up on the screen.
A nearby gas station can be selected
as a destination when the fuel level is
low.