Toyota 1998 Sienna, Руководство пользователя

Страница: 239 / 261

name. SIENNA (U)
239
Replacing light bulbs—
The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
CAUTION
Halogen bulbs have pressurized gas
inside and require special handling.
They can burst or shatter if scratched
or dropped. Hold a bulb only by its
plastic or metal case. Do not touch
the glass part of a bulb with bare
hands.
NOTICE
Only use a bulb of the listed type.
Light bulbs
Bulb
No.
W Type
Headlights HB2 60/55 A
Parking, front turn
signal and side
marker lights
1157 27/8 B
Rear turn signal
lights
1156 27 B
Stop and tail lights 1157 27/8 B
Back − up lights 921 18 C
License plate lights 168 5 C
High mounted
stoplight
921 18 C
Front personal lights
With moon roof
Without moon roof
—
—
8 D
Front interior light — 8 D
Rear personal lights — 8 D
Rear interior light — 8 D
Vanity mirror lights — 3 D
Door courtesy lights 194 3.8 C
Luggage
compartment light
— 5 D
A: HB2 halogen bulbs
B: Single end bulbs
C: Wedge base bulbs
D: Double end bulbs
—Headlights
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.