Toyota 12H-T, Руководство по ремонту

Страница: 7 / 338

I N -4 INTRODUCTION
-
Identification Information . General Repair Instructions
I D E N TI F I CATI O N I N F O R M A TI O N
E N G I N E SE RIAL N U M B E R
The engine serial number i s stamped o n the left side o f the
cylinder block
GE N E RAL R EPA I R I N S TR U C TIO NS
1 .
Use fender, sea! a n d floor covers to keep the vehicle clean
and prevent damage.
2.
During disassembly. keep parts in order to facilitate reas­
sembly.
Observe the followi ng
(a) Before perlorming electrical work, disconnect the
negative cable from the ba ttery terminal.
(bJ If
it
is necessary to disconnect the bat lery for inspec­
tion or repair. always d isconnect the cable from the
negative
(-I
terminal which is grounded t o the vehi­
cle body.
(c) To prevent damage to the battery terminal post,
loosen the terminal nut and raise the cable straight up ..,
without twisting it or prying
;1.
(d) Clean the battery terminal posts and cable terminal
with a shop rag. Do not scrape them with
a
lile or
o t her abrasive objec t.
(e) Install the cable terminal to the battery post with the
nut loose and tighten the nut aHer installation. Do not
use a hammer to tap the termi nal onto the post.
(f) Be sure the cover for the positive (+J terminal is pro­
perly in place.
4. Check hose and wiring connectors
10
make sure they are
securely and correctly connected
5.
No n-reusable parts
(a) Always replace coller pins. gas k ets, O-rings, oil seals
etc. with new ones.
fb) Non-reusable parts are indicated in the component
illustrations by the .... . symbol.
l