Toyota 12H-T, Руководство по ремонту

Страница: 6 / 338

INTRODUCTION
-
How
10
Use This Manual
IN-3
Illustration:
what to do and where
The procedures are presented in a step-by-step fOrmat:
•
The illustration shows what to do and where to do it.
•
The task heading tells what to do.
•
The detailed texl tells how to perform the task and gives
other informalion such as specifications and warnings.
Example·
�rlJSk heading:
REMOVE INJECTION NOZZLES
Using SST, remove the timer.
SST
09260-47010 109267-760201
Set pa{,No. C";;;;,ponents part NO.
what to do
Install and torque the round nut.
----
Oersiled text:
Torque:
750 kg-cm 154
ft-Ib,
74 N·m)
how to do task
""
Torque Specification
This format enables the experienced technician with a FAST
TAACK to the information needed. The upper case heading can
be read at a glance and only when necessary. the test below it
provides de1ailed information. Important specifications and
warnings always stand out in bold type.
REFERENCES
Aeferences have been kept to a minimum However, when they
are required you are given the
page to go to.
SPECIFICATIONS
Specifications are presented in bold type throughout the lext in
the applicable step. You never have to leave the procedure to
look up your specs. All specifications are also found in Appen­
dix A, specifications, for quick reference
WARNINGS, CAUTIONS, NOTES;
•
WARNINGS are presented in bold type, and indicate there is
a possibility of injury to you or other pec..ple.
•
CAUTIONS are also presented in bold type and indicale there
is a possibility 01 damage to the components being repaired.
•
NOTES are separated from the text but do not appear in
bold. They provide additional information to help you effi­
Ciently perform the repair.