TOX PRESSOTECHNIK Powerpackage Q Series, Оригинальная инструкция по эксплуатации, Страница: 22 / 80

Technical data
22 TOX_Manual_Powerpackage_line-Q_en
Tool coupling
ZWK
Tightening torque
ZWK 015 210 Nm
ZWK 030 230 Nm
ZWK 050 290 Nm
ZWK 075 500 Nm
ZWK 200 500 Nm
4.4 Press force table
The effective press force is the ratio of the available press force at the
specified air pressure to the press force required for the pressing process.
Press force table see separate document.
4.5 Specification for hydraulic oil
The following oils are approved for standard application:
Ÿ
Hydraulic oil HLP32 (according to DIN 51524-2), filtered < 5µm, load
rating > 30 N/mm2
Ÿ
Food grade oil Klüber Summit HySyn FG 32
The following hydraulic oils are approved with limitations for standard appli-
cation:
Ÿ
Hydraulic oil UCON™ LB-165
Ÿ Synthetic oil ISOTEX 46
Ÿ
Synthetic oil Envolubric PC 46 NWL
Ÿ The use of hydraulic oils that have not been approved as standard can
lead to an increase of maintenance intervals due to an increased intake
of air.
Ÿ
The use of hydraulic oils that have not been approved as standard can
reduce the lubrication capacity lower than for HLP32 hydraulic oils.
This can lead to a shorter lifetime of seals.
Ÿ Some sealing materials in case of hydraulic oils not approved as stan-
dard tend towards increased swelling and therefore to a reduced life-
time of the seals.