TOX PRESSOTECHNIK FinePress PFHL 008.002, Руководство по эксплуатации

Страница: 29 / 34

Pneumatic press PFHL / PFHW
OM 45.PFHL-PFHW.201803.en
29
10 Ordering spare parts / Repair
Information for ordering
To ensure a proper processing of
your spare parts order please indi-
cate the following numbers com-
pletely:
Press type:
_______________
Serial number: _______________
These information can be found on
the data sheet and on the type
plate of the machine.
In order to avoid wrong deliveries of spare parts,
you must specify the following:
− Designation of the spare part (according
to type sheet 'TOX ® -FinePress').
− Order number (according to type sheet
'TOX ® -FinePress').
Use original spare parts only
Only original spare parts from
TOX® PRESSOTECHNIK must be
used.
Notes regarding repairs
Repair service
Within the scope of our service of-
fer and on request it is possible to
have the press repaired at TOX®
PRESSOTECHNIK.
Safety regulations
When working on the machine, al-
ways observe the applicable safety
regulations and the legal condi-
tions.
Observe the instructions in chapter
2 'Safety' of these Operating In-
structions.
Tightening torque for the fastening screws of the press head on the frame
Press type Fastening screws press head at press frame Tension rod with nut DIN 980
Screw size Tightening torque Screw size Tightening torque
PFHL 008.002 M 12 135 Nm M 10 33 Nm
PFHL 013.002 M 12 135 Nm M 10 33 Nm
PFHL 022.002 M 16 340 Nm M 12 85 Nm
PFHL 033.002 M 16 340 Nm M 12 85 Nm
PFHL 056.002 M 16 340 Nm M 12 85 Nm
PFHW 008.002 M 12 135 Nm M 10 33 Nm
PFHW 013.002 M 12 135 Nm M 10 33 Nm
PFHW 022.002 M 16 340 Nm M 12 85 Nm
PFHW 033.002 M 16 340 Nm M 12 85 Nm
PFHW 056.002 M 16 340 Nm M 12 85 Nm