TOX PRESSOTECHNIK FinePress PFHL 008.002, Руководство по эксплуатации

Страница: 12 / 34

Pneumatic press PFHL / PFHW
12
OM 45.PFHL-PFHW.201803.en
Warning and information signs
Compressed air supply: Maximum operating
pressure
Observe the maximum operating
pressure
The operating pressure of
max. 6 bar must not be exceeded,
otherwise the operational reliability
of the appliance cannot be longer
guaranteed.
In case of compressed air supplies > 6 bar, a
pressure reducing valve must be superposed to
limit the operating pressure to the max. permitted
value.
Maximum press force
Observe maximum press force
The indicated press force must
never be exceeded, otherwise the
operational safety of the device is
no longer guaranteed.
CE mark
Type plate:
In case of queries please state the following
data:
Type: _____________________
Serial number: _____________________
You will find these information on the type plate
of the press which is attached to the press frame.
The code of the press types is described in chap-
ter 1 'Technical data'.
Instructions for ordering wear and spare parts
are given in chapter ‘Ordering of spare parts / re-
pair’.
Danger points and notes
Example: Press type PFHL,
drawing without tools
Accordingly applies to all other types
Maintenance unit, drive
Danger due to the high pressure in the pneumatic
system. Service work must only be realized by au-
thorized specialists.
Observe the maximum operating pressure.
Risk of shearing and crushing
Observe the safety distance up to the limit of
danger point (1) (observe DIN EN 349).
Exclude the risk of danger to other persons.
Resetting the machine in case of injuries:
Release start button "pneumatic support" and
move hand lever to the top.
Tool setting, maintenance and repair work must
only be executed by authorized specialists.
1