manualshive.com logo in svg

TOX PRESSOTECHNIK EQe-K, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
TOX PRESSOTECHNIK EQe-K Скачать руководство пользователя страница 33

Installation

TOX_Manual_ElectricPowerDrive_EQe-K_en

33

6 Installation

6.1

Safety during installation

The installation may only be carried out by trained and authorized person-
nel.

 DANGER

Electrical hazards in case of contact with live parts!

Electric shock, burns or death in case of contact with live parts!

è

Have all work on the electrical equipment performed by an electrician.

è

Disconnect power supply.

è

Wait for residual energy to disspate safely (at least 3 minutes).

 WARNING

Hazard from suspended loads!

Severe crushing, impacts and serious accidents as a result of improper
transportation and falling load!

è

Only use lifting gear that is appropriate and in perfect technical condi-
tion, as well as load attachment devices with an adequate safe working
load.

è

Never stand or work under suspended loads.

è

Make sure that that no person is in the danger area.

è

When transporting and setting down, make sure that no parts of the
body become jammed.

è

Wear suitable personal protective equipment (e.g. safety boots).

 CAUTION

Tripping points from laid supply lines!

Injuries from tripping and falling!

è

Avoid tripping points when setting up.

è

Mark unavoidable tripping points with warning sign.

Содержание EQe-K







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды