Touchstone VALUELINE 30003, Руководство пользователя, Страница: 15 / 28

Valueline TV Lift
www.touchstonehomeproducts.com 800.215.1990
rev. 20200618
15
Operating the Lift
– cont.
Wireless RF Control
Wireless RF Remote
Wireless RF
Remote Button
Function
UP Button
: PRESS the button once to raise the lift.
The lift will raise all the way up unless the stop
button is pressed, if no memory position is set.
Note: When a memory position is set, the lift will
travel to the memory position when the UP button
is pressed.
DOWN: PRESS the button once to lower the lift.
The lift will lower all the way down unless the stop
button is pressed.
STOP: Press the button once to stop the lift.
NOTE: For applications where fixtures are mounted above the lift and in the path of the lift travel, please use
the WIRED HANDSET ONLY to avoid damages to the lift and other items, if a memory height is not set!
Pairing RF Remote Control to Control Box
The wireless RF remote will be paired to the Valueline TV Lift out of the box. Should the wireless RF remote stop
functioning, please follow the instructions below for pairing the RF remote control to the lift:
1. Unplug the power cable from the lift control box.
2. Wait 5 seconds and plug the lift power cable back into the control box.
3. Within 5 seconds of plugging the power cable into the control box, press UP button on the wireless RF remote
after plugging the power cable to control box.
4. The wireless RF remote is now ready for use.