Touchstone VALUELINE 30003, Руководство пользователя, Страница: 14 / 28

Valueline TV Lift
www.touchstonehomeproducts.com 800.215.1990
rev. 20200618
14
Operating the Lift
The ValueLine TV Lift can be controlled through the provided wired handset controller or the wireless remote
control.
Wired Handset Control
Wired Handset
Control
Lift Height : Shows the height of the lift in inches.
UP Button : PRESS and HOLD this button to raise the lift.
Releasing this button will stop the lift.
**Note: If a memory height is set, holding the UP button will
ignore the memory height and the lift will continue to run past
the set memory height.
DOWN: PRESS and HOLD this button to lower the lift. Releasing
this button will stop the lift.
MEMORY:
The lift can be set to 1 memory position during the
UP travel. To set the memory position, raise the lift to the desired
position. At the desired position, PRESS the M button to set the
memory height. The LED screen will blink to confirm the height
setting. Repeat the operation to change the memory setting.
When the memory position is set, the UP button on the RF
Wireless Remote and IR Wireless Remote will go to the memory
height that was set.
NOTE: For applications where fixtures are mounted above the lift and in the path of the lift travel, please use
the WIRED HANDSET ONLY to avoid damages to the lift and other items!