2800/3900 SRV PRO 360-Degree Swivel TV Lift
www.touchstonehomeproducts.com
800.215.1990
rev. 20201214
16
Operating the Lift
– cont.
Wireless RF Control
Wireless RF Remote
Wireless RF
Remote Button
Function
UP Button
: PRESS and HOLD the button to raise
the lift. The lift will raise all the way up unless the
button is released.
DOWN:
PRESS and HOLD the button to lower the
lift. The lift will lower all the way down unless the
button is released.
STOP:
This button is disabled on the 2800/3900
SRV PRO 360-Degree Swivel TV Lift
NOTE: Please be sure that the safety sensor cable is connected to the Swivel Sensor port on the control box at all
times. The lift will operate WITHOUT the swivel sensor plugged into the Swivel Sensor port on the control box
and may cause damage to your lift, TV, or cabinet if the TV is not placed in the home position before operation.
Pairing RF Remote Control to Control Box
Please follow the instructions below for pairing your RF remote control to the new control box:
1. Unplug the power cable from the lift control box.
2. Wait 5 seconds and plug the lift power cable back into the control box.
3. Within 5 seconds of plugging the power cable into the control box, press UP button on the wireless RF remote
after plugging the power cable to control box.
4. The wireless RF remote is now ready for use.
