Wall
Wall
2018.05
0IM80503
Installation manual
Precaution before installation
Install the product properly according to this installation manual for best performance. When the installation
work is complete, give a detailed explanation of how to use this product to the customer.
Included parts
Read these “Safety Cautions” carefully before starting installation work. Install the product properly.
This manual uses various indications to ensure a proper, safe installation and to prevent injury to the customer,
injury to other people and damage to property.
The symbols should be interpreted as follows.
Items to be observed are classified by type and explained with the following pictograms.
Caution
Improper use or installation of this product may result in injury or
property damage.
Symbol example
Meaning
Safety Cautions
(Observe these cautions for safety’s sake.)
This symbol is used to
indicate no tampering with
this product.
This symbol is used to
indicate a required step in
the use of this product.
Do not excessively bend or twist the water supply hose.
Otherwise, the flexible water supply hose may break causing leaks
that may damage property.
Caution
Do not subject the toilet bowl to strong forces or impacts.
Otherwise, the toilet bowl may break causing injury or leaks that
may damage property.
Be sure to use the included or specified parts for installation work.
Otherwise, the product may not be installed properly.
Do not remove the water supply filter with the water supply
valve being open.
If the water supply valve is not closed, water may gush out causing
leaks that may damage property.
Carry out the installation work according to this installation manual.
Otherwise, damage caused by water leaks may occur.
Required
Prohibited
•
•
•
•
•
•
•
A-1
B-1
B-3
B-2 (300)
D-2
(mm)
C889***
Product Diagram
(mm)
(mm)
(mm)
C887***
Product Diagram
380
395
657
699
277
304
428
387
727
701
20
19
<When distance from wall to
drainage center is 305 mm (12-3/8'')>
<When distance from wall to
drainage center is 400 mm (15-3/4'')>
C-1(305)
C-1(400)
C-2
E-6
C-3
C-4
C-5
E-4
E-2
E-3
E-1
C-6
E-5
E-1
E-1
100 100
115 115
202
239
202
239
D-1
*The product may be slightly different in shape than the product shown in the figure depending on the model.
Secure the space required for toilet installation and at the same
time, check door opening/closing for possible interference.
Turn on electricity and water supply to the product after
completing all installation work.
Use care not to damage the end of the connection hose.
The minimum required water pressure (flowing) is 7PSI at
2.64 Gal/min (0.05MPa at 10 L/min) while the maximum
water pressure (static) is 108PSI(0.75MPa).
Make sure before installation that the water supply source
and water drain pipe are in the specified positions
according to the diagram.
If it is not positioned properly, the product may not be
able to be installed correctly.
Please wash away the dust or sand in the water supply
pipe completely before installing the water supply valve.
If there is a gap between the discharge pipe and floor,
fill it with mold-resistant silicone-based seal material
(Mediseal).
Doing otherwise may cause water to leak downstairs.
(mm)
For setting water supply Rc 1/2
150±10
200±10
PVC water drain pipe
305±10
400±10
<When distance from
wall to drainage center is
305 mm (12-3/8'')>
<When distance from
wall to drainage center is
400 mm (15-3/4'')>
PVC water drain pipe
PVC water drain pipe
C887*** C889*** Integrated Toilet
<There parts are not included in some cases>
F-1
F-2
F-3
F-4
F-5
F-6
