manualshive.com logo in svg

TOTALINE P286-1500, Инструкция по эксплуатации, Страница: 1 / 28

Поделиться
Скачать
TOTALINE P286-1500 Скачать руководство пользователя страница 1

FCC Statement 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC

RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

REPLACEMENT COMPONENTS DIVISION

©

CARRIER CORPORATION

www.totaltouch.info

Technical Support: 1-866-90TOUCH (1-866-908-6824)

Physical Dimensions

Case:

5.75” x 4.75” x 1.25” (145mm x 120mm x 30mm)

Display:

3.625” x 2.125” (95mm x 55mm)

Electrical Rating

24 volt AC/DC

Class 2 maximum 4 amps

Temperature Ac/-1°F degree

Power failure protection safeguards clock and memory.

Made in China / Printed in China

US PatentS 7,050,026  |  7,028,912  | 6,902,117  |  6,786,421 Other Patents Pending

www.totaltouch.info

Technical Support 1-866-90TOUCH  (1-866-908-6824)

INSTRUCTION MANUAL

P286-1500

3 Heating and 2 Cooling 

with Automatic Humidity Control & Dual Fuel Switch

To be used with P286-0001:

Outdoor Wireless

Temperature Transmitter & Receiver Kit

Содержание P286-1500





























Отзывы:

Нет отзывов