INFORMATION
Not all Sheds will have the same panel arrangment. Please Ensure that the 4ft Panels are central for all
builds.
STEP • 4
STEP • 5
04
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
4FT BLANK
PANEL
4b
SIDE PANELS
BACK PANELS
Fix 4ft Wide Blank
Sections. Create a Corner
for Balance.
4a
. Place a 4ft blank panel side as shown below.
Repeat this step for all larger sheds. Please use reference on left for additional sections required
according to your shed size.
4b.
Screw the panels alongside the framework as shown in Diagram 4b.
x2
4.0 x 70mm
Per Floor Section
x3
x3
4.0 x 70mm
Per Panel Edge
4ft LEFT PANEL
4ft RIGHT PANEL
Fix 4ft Wide Right Blank
Section to Back Panel 4ft
Section
5a.
Now place a 4ft panel as shown. Repeat this step for all other
sheds. Please reference Step 4 to recap on how to secure a corner section.
5b.
It is advisable to have a second person holding the panel in place while the next section is
attached. You may notice that the panels will have nothing to balance on or againts at this stage.
Please use supports if required at this stage untill the corner frames are attached for balance.
4c.
DO NOT fix the panels to the floor to
leave room for adjustments in the final
stages. Next Step will create a corner frame
balance 4ft panels.
INFORMATION
Repeat Step 4, making sure that the back
panel sizes corresponds with the floor size.
x2
4.0 x 70mm
Per Floor Section
x3
x3
4.0 x 70mm
Per Panel Edge
© Sheds (Midlands) Limited 2021
www.totalsheds.co.uk
