Figure 5
: Two boxed connectors for connecting the Level
Shifter Board to one or more target buses.
These two boxed connectors have an almost identical pinout to the
ADAPTER
and
ANALYZER
connector. The only di
ff
erence is that the 5.0 V pins will have the target's
voltage level instead.
The pinout of the two connectors is described in Figure 6.
Figure 6
: The pinout for the two boxed connectors on the
Target side of the Level Shifter Board.
3.3 EXT 3.3V and EXT TGT
All the bus and power signals on the board are also available through two 16-pin
headers on the board (Figure 7}. The
EXT 3.3 V
connector provides the bus signals at
the standard signaling levels employed by Total Phases I C, SPI, and MDIO products.
The
EXT TGT
connector provides the bus and power signals of the downstream device
and will be at the voltage level de
fi
ned by the user. All connections are labeled for the
user's convenience.
Level Shifter Board User Manual v1.01
2
8
