RE V. 1.0-12 /16
Pl a st i 350 X P 33
6 INSTRUCTIONS
6.1
OPERATOR QUALIFICATION
The machine must be used by qualified personnel. The machine is intended for use by a single user at a time, which must have received
adequate information and training.
6.2
WORKPLACE AND MACHINE ELEMENTS
In the starting phase the operator occupies the front part with respect to the machine. This position could be changed according to the
processes in place.
6.3
WORKING INSTRUCTIONS
6.3.1 C
ontrol
Panel
and
disPlay
funCtions
In the home menu (fig.6.1) the most important working parameter like temperature, speed, paper size are shown. Other useful controls
like start/stop or “separation on”/”separation off” are also reported in the home menu.
Fig.6.1
In the first machine setting menu (fig.6.2) paper length (in mm), working speed (from 1 to 5 mt/min), sheet overlap amount (in mm) and
sheet separation point (in mm from the edge of the sheet) can be adjusted.
Fig.6.2
ENG
Ch a P t ER 6: iNst RuC t iONs
