RE V. 2.1
MEg a sta R 35
7 MAINTENANCE
7.1
ORDINARY MAINTENANCE
All repair and extraordinary maintenance operations must only be carried out by authorised “Mamo” service centres, using ori-
ginal spare parts and accessories
Always unplug the appliance prior to any maintenace work
This appliance has been designed and manufactured to require no special maintenance and oiling during its life.
However it is recommended to perform the following operations at intervals of 12 months;
• Grease the bearings of the connecting rods handling
• Check for oil leaks from the gearbox
Thus are no specific operations to be carried out at any time. If you do not use the appliance for a long time it is recommend to unplug it
and cover with a sheet. For a better and long life of the appliance we recommend you to proceeed as follows:
• clean the machine with a soft cloth with neutral detergent or alcohol, excluding the use of abrasive or ammonia-based cleaners
that can damage the unit
MAMO offers cleaning kits to maintenance contracts. For more information, contact your local service center MAMO or your represen-
tative / distributor.
7.2
NON ORDINARY MAINTENANCE
7.2.1 a
ssistanCe
request
For any maintenance is not included in the “Routine Maintenance” contact Tosingraf customer service.
Tosingraf S.r.l.
Via Istria, 23 - 36027 - Rosà (VI)
Tel. +39 0424 898312 - Fax. +39 0424 539134
[email protected] - www.mamosrl.com
7.3 TROUBLESHOOTING
Each machine has been assembled and thoroughly checked at the factory prior to shipment and is unlikely to be subject to failure or brea-
kage. However, we propose below a summary list of the main causes of anomalies verifiable and of the measures necessary to remedy it.
PROBLEM
CAUSE
SOLUTION
The red lamp lights up
flashing
Brief power failure during the cycle - Engine
locked - Protective cover the machine open
Hold down the REVERSE button (4) - Reinstall the
cover and tighten the screws.
7.4
SERVICE LIFE AND DISPOSAL OF THE MACHINE
7.4.1 e
xPeCted
duration
of
the
maChine
The life expectancy of the machine under normal use and regular maintenance is believed to be at least five years.
Upon termination of the activities of the machine’s disposal of the same can be done using a standard collection center and industrial
waste disposal.
ENG
Ch a P t ER 7: M a INt EN a NCE
